Wiring Method of DC Contactor for Electric Vehicle
Release time:
2022-03-09
Electric vehicle DC contactor is a kind of AC drive motor. DC motor principle: When the coil is powered on, an electromagnetic field is generated around the motor rotor, and the left side of the motor rotor is pushed away from the left magnet and attracted to the right, causing rotation. The motor rotor rotates again by inertial force. When the motor rotor runs to the horizontal position, the converter reverses the direction of the current in the coil, and the electromagnetic field generated by the coil is also greatly reversed, and so on.
electric vehicle dc contactor wiring method
1. electric vehicle dc contactor only main switching power supply and coil switching power supply. The negative stage of the coil switching power supply is received from the positive stage of one coil, the power switch is received from the other end, and the main task terminal is fed into the motor.
2. Electric vehicle DC contactor is an AC drive motor. DC motor principle: When the coil is powered on, an electromagnetic field is generated around the motor rotor, and the left side of the motor rotor is pushed away from the left magnet and attracted to the right, causing rotation. The motor rotor rotates again by inertial force. When the motor rotor runs to the horizontal position, the converter reverses the direction of the current in the coil, and the electromagnetic field generated by the coil is also greatly reversed, and so on.

how to connect electric car dc contactor ?
The use of electric vehicle DC contactor
1. Select the type of electric vehicle DC contactor: The type of DC contactor should be selected according to the type of load current and the weight of the load, namely AC load or DC load, light load, general load or heavy load for AC.
2. Rated voltage of main contact of DC contactor of electric vehicle: The rated voltage of main contact of DC contactor can be calculated according to working experience, where main contact ≥ PN motor/(1~1.4)UN motor. If the motor operated by the DC contactor is frequently started, braked or turned over, the rated voltage of the main contact of the DC contactor will generally be reduced by one level.
3. Rated voltage of main contact: The working voltage marked on the factory nameplate of of DC contactor of electric vehicle refers to the rated voltage that the main contact can bear, not the working voltage of attracting coil. The rated voltage of main contact of contactor should not be less than the rated voltage of load when applied.
4. Selection of actual working frequency: The actual working frequency refers to the frequency of contactor conduction per hour. When the conduction current is large and the conduction frequency is too high, the contact will be seriously over-temperature and even arc welding. If the actual operating frequency exceeds the required standard value, an electric vehicle DC contactor with a higher rated voltage should be used.
5. Selection of coil rated voltage: The rated voltage of the coil is not necessarily equal to the rated voltage of the main contact. When the route is simple and the application of household appliances is less, the working voltage of 380V or 380V can be used. If the route is complicated and the application of household appliances exceeds 5 hours, coils with a working voltage of 24V, 48V or 110V (36V, 110V or 127V required in 1964 internationally) can be used.
Related News